| Issue Date | Title | Author(s) |
| 2014 | In vitro cytocompatibility, ageing and wear behavior of ceria stabilized zirconia bioceramic | Pandey, Ajoy Kumar; Biswas, Koushik |
| 2014 | Hot-pressing of MoSi2 reinforced B4C composites | Kumar, Shankar; Sairam, K.; Sonber, J.K.; Murthy, T.S.R.Ch.; Reddy, Vidhyasagar; Rao, G.V.S. Nageswara; Rao, T. Srinivasa |
| 2014 | Effect of particle size and oxygen content of Si on processing, microstructure and thermal conductivity of sintered reaction bonded Si 3N4 | Golla, Brahma Raju; Ko, Jae Woong; Kim, Jin-Myung; Kim, Hai-Doo |
| 2014 | Production of nanocrystalline TiB2powder through self-propagating high temperature synthesis (SHS) of TiO2-H3BO3-Mg mixture | Gadakary, Saikumar; Khanra, Asit K.; Veerabau, R. |
| 2015 | Evaluation of Alloy C276 for High Strength Fastener Applications in Marine Environments | Mohan, M K; Rao, M Nageswara |
| 2013 | Low cycle and ratchetting fatigue behavior of high UTS/YS ratio reinforcing steel bars | Bar, H.N.; Sivaprasad, S; Narasaiah, N; Paul, Surajit K; Sen, B.N; Chandra, Sanjay |
| 2015 | Synthesis, extrusion processing and ionic conductivity measurements of sodium β-alumina tubes | Avinash, Karanja; Suresh, Madireddy Buchi; Khanra, Asit Kumar; Johnson, Roy |
| 2013 | Effect of milling on sintering behavior of γ-TiAl by spark plasma sintering | Kennedy, S.; Kumaran, S; Srinivasa Rao, T |
| 2015 | The influence of phase gradient within the micro arc oxidation (MAO) coatings on mechanical and tribological behaviors | Krishna, L. Rama; Gupta, P.S.V.N.B.; Sundararajan, G. |
| 2015 | Effect of Heat Treatment on the Electrochemical Corrosion Behavior of Ti- 15 V- 3 Al- 3 Cr- 3 Sn Alloy in HCl and NaCl Media | Pappu, Sravani; Kamal, Vamsi; Mohan, M. K. |
| 2015 | Effect of boron and carbon addition on microstructure and mechanical properties of metastable beta titanium alloys | Banoth, Ravinaik; Sarkar, Rajdeep; Bhattacharjee, Amit; Nandy, T.K.; Rao, G.V.S. Nageswara |
| 2012-06 | Densification of Al-2024 and Al-2024/Al2O3 Powders by Conventional P/M Route and ECAP: A Comparative Study | Gupta, N.; Ravisankar, B.; Ravisankar, B; Kumaran, S; Srinivasa Rao, T. |
| 2013-05 | Tensile and fracture toughness of high strength β Titanium alloy, Ti–10V–2Fe–3Al, as a function of rolling and solution treatment temperatures | Srinivasu, G.; Natraj, Y.; Bhattacharjee, A.; Nandy, T.K; Nageswara Rao, G.V.S. |
| 2015 | Sinterability studies of monolithic chromium diboride (CrB2)byspark plasma sintering | Mahesh, B.; Sairam, K.; Sonber, J.K.; Murthy, T.S.R.Ch.; Rao, G.V.S. Nageswara |
| 2015 | Nanoindentation response of ITO film | Pradeepkumar, Maurya Sandeep; Sibin, K.P.; Swain, Niharika; Sridhara, N.; Dey, Arjun; Barshilia, Harish C.; Sharma, Anand Kumar |
| 2014 | Effect of suction/injection on free convection along a vertical plate in a nanofluid saturated non-Darcy porous medium with internal heat generation | Chamkha, A.J.; Rashad, A.M; Reddy, Ch. Ram; Murthy, P.V.S.N. |
| 2015 | Development of a Novel Aluminium Based Metal Matrix Composite using Insitu Ternary Mixture (Al2O3-SiC-C) Prepared by Thermal Treatment of Fly-ash | Govindarao, R.; Ganguly, R. I.; Dash, R. R.; Rao, P. Surya Prakash; Reddy, G. S.; Singh, S. K. |
| 2015 | Effect of alloying addition and microstructural parameters on mechanical properties of 93% tungsten heavy alloys | Ravi Kiran, U.; Panchal, A.; Sankaranarayana, M.; Rao, G.V.S. Nageswara; Nandy, T.K. |
| 2014 | Effect of agglomeration and calcination temperature on the mechanical properties of yttria stabilized zirconia (YSZ) | Pandey, Ajoy Kumar; Biswas, Koushik |
| 2015 | Densification and mechanical properties of CrB2þMoSi2 based novel composites | Reddy, Vidhyasagar; Sonber, J.K.; Sairam, K.; Murthy, T.S.R.Ch.; Kumar, Shankar; Rao, G.V.S. Nageswara; Rao, T. Srinivasa; Chakravartty, J.K. |
