Subscribe to this collection to receive daily e-mail notification of new additions

Issue Date	Title	Author(s)
2012-09	Mechanism of material removal during tribological behaviour of aluminium matrix (Al–Zn–Mg–Cu) composites	Rao, R.N.; Das, S.; Mondal, D.P.; Dixit, G.
2015	Performance and emission prediction of a tert butyl alcohol gasoline blended spark-ignitionengine using artificial neural networks	Danaiah, Puli; Ravi Kumar, P.; Rao, Y.V.H.
2012	nfluence of Tool Pin Profiles on Friction Stir Welding of Copper	Kumar, A.; Raju L.S., L.S.
2013-03	Effect of overlapping ratio on mechanical properties and formability of friction stir processed Mg AZ31B alloy	Venkateswarlu, G.; Devaraju, D.; Davidson, M.J; Kotiveerachari, B; Tagore, G.R.N.
2013-02	Effect of surface modification and hybridization on dynamic mechanical properties of Roystonea regia/glass–epoxy composites	Goud, G.; Rao, R.N.
2015	Grey relational analysis coupled with firefly algorithm for multiobjective optimization of wire electric discharge machining	Varun, A; Venkaiah, N
2015	Analytical Modeling of the Friction Stir Welding Process Using Different Pin Profiles	GADAKH, V. S.; KUMAR, A.; VIKHE PATIL, G. J.
2015	Optimum Process Parameters for Enhanced Uniform Hardness Distribution and Barreling Behavior in Upsetting	HariKrishna, Ch.; Davidson, M. J.; Nagaraju, Ch.
2015	Assessment of surface roughness and MRR while machining brass with HSS tool and carbide inserts	Arun Vikram, K; Ratnam, Ch; Narayana, K Sankara; Ben, B Satish
2015	Formability analysis of dissimilar tailor welded blanks welded with different tool pin profiles	NADIKUDI, Bhanodaya Kiran Babu; DAVIDSON, M. J.; AKASAPU, Neelakanteswara Rao; GOVINDARAJU, M.
2013-04	Dry sliding wear maps for AA7010 (Al–Zn–Mg–Cu) aluminium matrix composite	Rao R, .N.; Das, S.; Mondal, D.P; Dixit, G.;; Tulasi Devi, S.L.
2014	Friction factor evaluation using experimental and finite element methods for Al-4%Cu preforms	Desalegn, Wogaso; Davidson, M.J.; Khanra, A.K
2014	Interaction of surface radiation with conjugate mixed convection from a vertical channel with multiple discrete heat sources	Londhe, Shrikant D.; Gururaja Rao, C.
2012-08	Taguchi Optimisation of Friction Stir Processing Parameters to Achieve Maximum Tensile Strength of Mg AZ31B Alloy	Venkateswarlu, G.;; Davidson, M.J; Tagore, G.R.N.
2014	EXPERIMENTAL STUDY ON TWO-PHASE PRESSURE DROP OF AIR-WATER IN SMALL DIAMETER TUBES AT HORIZONTAL ORIENTATION	Autee, Arun; Rao, S. Srinivasa; Puli, Ravikumar; Shrivastava, Ramakant
2014	Artificial neural network approach for prediction of stress–strain curve of near b titanium alloy	Gangi Setti, Srinivasu; Rao, R.N
2015	Effect of swirl on performance and emissions of CI engine in HCCI mode	Sharma, T. Karthikeya; Rao, G. Amba Prasad; Murthy, K. Madhu
2014	Experimental and Numerical Studies on Spherical Roller Bearings Using Multivariable Regression Analysis	Desavale, R.G.; Venkatachalam, R.; Chavan, S.P.
2015	Effect of pilot fuel injection operating pressure in hydrogen blended compression ignition engine: An experimental analysis	Quadri, Syed Azam Pasha; Masood, M.; Kumar, P. Ravi
2014	Seizure pressure and sliding velocity diagrams on tribological behavior of Al alloy composites in as-cast and heat-treated conditions	Rao, R.N; Das, S; Tulasi Devi, S.L