Subscribe to this collection to receive daily e-mail notification of new additions

Issue Date	Title	Author(s)
2012-03	Recrystallisation and bonding behaviour of ultra fine grained copper and Cu–Cr–Zr alloy using ECAP	Jayakumar, P.K.; Balasubramanian, K.; Rabindranath Tagore, G.
2012-02	Prediction of Vehicle Reliability using ANN	Hari Prasad, B.; Bhattacharjee, P; Venugopal, A.
2011	EFFECTIVE UTILIZATION OF B20 BLEND WITH OXYGENATED ADDITIVES	Satya, V.P.U.; Murthy, K.M.; Rao, G.A.P.
2012-03	Prediction of flow stress in dynamic strain aging regime of austenitic stainless steel 316 using artificial neural network	Gupta, A.K.; Singh, S.K.; Reddy, S; Hariharan, G.
2015	Direct injection of water mist in an intake manifold spark ignition engine	Babu, A.R.; Rao, G. Amba Prasad; Hari Prasad, T.
2015	Simulation of biomass gasification in downdraft gasifier for different biomass fuels using ASPEN PLUS	Keche, Ashok J.; Gaddale, Amba Prasad Rao; Tated, Rajendrakumar G.
2012-04	Influence of grain refining elements on mechanical properties of AISI 430 ferritic stainless steel weldments – Taguchi approach	Mallaiah, G.; Kumar, A.; Ravinder Reddy, P.; Madhusudhan Reddy, G.
2014	Analysis for optimal decisions on turning Ti-6Al-4V with Taguchi-grey method	Satyanarayana, Kosaraju; Gopal, Anne Venu; Babu, Popuri Bangaru
2012-04	Studies on mechanical and dry sliding wear of Al6061–SiC composites	Veeresh Kumar, G.B.; Rao, C.S.P.; Selvaraj, N.
2012-09	Mechanical and electrical performance of Roystonea regia/glass fibre reinforced epoxy hybrid composites	Goud, G.; Rao, R.N.
2013	Influence of parameters and optimization of EDM performance measures on MDN 300 steel using Taguchi method	Nikalje, A.M; Kumar, A.; Srinadh, K. V. Sai
2012-09	Modelling studies of sheet metal formability of friction stir processed Mg AZ31B alloy under stretch forming	Venkateswarlu, G.; Davidson, M.J.; Tagore, G.R.N.
2014	Studies on the formability of powder metallurgical aluminum–copper composite	Wolla, Desalegn Wogaso; Davidson, M.J; Khanra, A.K
2015	Multi-objective optimization of electrical discharge machining of PH17-4 stainless steel with surfactant-mixed and graphite powder–mixed dielectric using Taguchi-data envelopment analysis–based ranking method	Reddy, V Vikram; Madar Valli, P; Kumar, A; Reddy, Ch Sridhar
2012	Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles	Kumar, G.B.V.; Rao, C.S.P.; Selvaraj, N.
2013	Effect of methanol gasoline blended fuels on the performance and emissions of SI engine	Danaiah, Puli; Kumar, P. Ravi; Kumar, D. Vinay
2015	Influence of surfactant and graphite powder concentration on electrical discharge machining of PH17-4 stainless steel	Reddy, V. Vikram; Kumar, A.; Madar Valli, P.; Reddy, Ch Sridhar
2015	Effective reduction of in-cylinder peak pressures in Homogeneous Charge Compression Ignition Engine - A computational study	Karthikeya Sharma, T.; Rao, G.Amba Prasad; Madhu Murthy, K.
2012-09	Parametric studies and correlations for combined conduction-mixed convection–radiation from a non-identically and discretely heated vertical plate	Kumar, C.G.; Rao, C.G.
2014	Effect of differential heat treatment on the formability of aluminium tailor welded blanks	Bhanodaya Kiran Babu, N.; Davidson, M.J.; Neelakanteswara Rao, A.; Balasubramanian, K.; Govindaraju, M.