Subscribe to this collection to receive daily e-mail notification of new additions

Issue Date	Title	Author(s)
2013-11	Optimal machining conditions for turning Ti-6Al-4V using response surface methodology	Kosaraju, S.; Anne, V.G.
2014	Application of Taguchi Method on Biaxial Stretch Forming of Friction Stir Processed Mg AZ31B Alloy	Venkateswarlu, G; Davidson, M.J.; Tagore, G.R.N
2015	Experimental and simulation studies on thixoforming of AA 2017 alloy	Shashikanth, C. H.; Davidson, M. J.
2013-10	Antifriction Bearings Damage Analysis Using Experimental Data Based Models	Desavale, R.G.; Venkatachalam ., R; Chavan, S.P.
2014	Experimental investigations and development of cutting force model for self-propelled rotary face milling cutter in machining of titanium alloy	Jegaraj, J. John Rozario; Raju, C.S.; Rao, C.S.P.; Ramesh Kumar, K
2013-05	Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid composites via friction stir processing	Devaraju, A.; Kumar A, A.; Kotiveerachari, B.
2015	Enhancement of rate of heat transfer in HCCI engine with induction induced swirl and under varying compression ratios and boost pressures	Sharma, T. Karthikeya; Rao, G. Amba Prasad; Murthy, K. Madhu
2013-10	nfluence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing	Devaraju, A.; Kumar, A.; Kumaraswamy, A.; Kotiveerachari, B.
2013-10	Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC + Gr) and (SiC + Al2O3)] fabricated by friction stir processing	Aruri, D.;; Adepu, K; Adepu, K.; Bazavada, K.
2015	Investigation of work hardening behavior and failure analysis of billets due to biaxial stresses in simple upsetting process	Krishna, Ch. Hari; Davidson, M. J; Nagaraju, Ch.
2012-05	Influence of process parameters on impact toughness and hardness of dissimilar AISI 4140 and AISI 304 continuous drive friction welds	Chander, G.S.; Reddy, G.M.; Tagore, G.R.N.
2015	Development of Silicon Nitride-Based Ceramic Radomes — A Review	Kandi, Kishore Kumar; Thallapalli, Nagaveni; Chilakalapalli, Surya Prakash Rao
2015	Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method	Kolli, Murahari; Kumar, Adepu
2013-06	Effect of microstructure and texture on forming limits in friction stir processed AZ31B Mg alloy	Venkateswarlu, G.; Singh, A.K; Davidson, J.; Tagore, G.R.
2009	Application of Six Sigma level in delivery schedules in high volatile production environments	Kumar, Agganoor Prabhu; Reddy, Patel Ram; Tagore, Ravindranath
2009	Fluid Flow and Heat Transfer Studies and Correlations for Mixed Convection with Conduction and Radiation from a Discretely Heated Vertical Plate	Sawant, S.M; Rao, C. Gururaja
2008	Consignment stock policy using genetic algorithm for effective inventory management in supply chains	Srinivas, Ch.; Rao, C.S.P.; Rao, Y.V.
2008	Thermal design analysis of compact heat exchanger using nanofluids	Vasu, V; Rama Krishna, K; Kumar, A.C.S
2007	Consignment stock policy with controllable lead time for effective inventory management in supply chains	Srinivas, Ch; Rao, C.S.P.
2007	Optimisation of supply chains for single vendor-multibuyer consignment stock policy under controllable lead time using genetic algorithm	Srinivas, Ch; Rao, C.S.P.