Please use this identifier to cite or link to this item: http://localhost:8080/xmlui/handle/123456789/1715
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPramanik, K.-
dc.date.accessioned2024-11-25T05:27:51Z-
dc.date.available2024-11-25T05:27:51Z-
dc.date.issued2003-02-
dc.identifier.citation0.1016/S0960-1481(02)00027-7en_US
dc.identifier.urihttp://localhost:8080/xmlui/handle/123456789/1715-
dc.descriptionNITWen_US
dc.description.abstractIn the present investigation the high viscosity of the jatropha curcas oil which has been considered as a potential alternative fuel for the compression ignition (C.I.) engine was decreased by blending with diesel. The blends of varying proportions of jatropha curcas oil and diesel were prepared, analyzed and compared with diesel fuel. The effect of temperature on the viscosity of biodiesel and jatropha oil was also studied. The performance of the engine using blends and jatropha oil was evaluated in a single cylinder C.I. engine and compared with the performance obtained with diesel. Significant improvement in engine performance was observed compared to vegetable oil alone. The specific fuel consumption and the exhaust gas temperature were reduced due to decrease in viscosity of the vegetable oil. Acceptable thermal efficiencies of the engine were obtained with blends containing up to 50% volume of jatropha oil. From the properties and engine test results it has been established that 40–50% of jatropha oil can be substituted for diesel without any engine modification and preheating of the blends.en_US
dc.language.isoenen_US
dc.publisherRenewable Energyen_US
dc.subjectJatropha curcas oilen_US
dc.subjectBiodieselen_US
dc.subjectViscosityen_US
dc.subjectDieselen_US
dc.titleProperties and use of jatropha curcas oil and diesel fuel blends in compression ignition engineen_US
dc.typeArticleen_US
Appears in Collections:Chemical Engineering



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.