1. Dspace@NITW
  2. Conference Papers
  3. Mechanical Engineering
Please use this identifier to cite or link to this item: http://localhost:8080/xmlui/handle/123456789/1126
Full metadata record
DC FieldValueLanguage
dc.contributor.authorP. Rama Mohan, C.M.Vara Prasad-
dc.date.accessioned2024-10-25T07:01:20Z-
dc.date.available2024-10-25T07:01:20Z-
dc.date.issued1983-
dc.identifier.urihttp://localhost:8080/xmlui/handle/123456789/1126-
dc.description.abstractThis paper reports an investigation carried out on the recirculation zones established in conical chambers with radial vaned inlet swirlers. The boundaries of the recirculation zones established in various conical chambers of different cone angles are presented for different inlet swirl numbers and an optimum cone angle which gives a reasonably short length of the recirculation zone with maximum pressure recovery is suggested. The inlet swirl number is also optimized for a fairly high swirl strength within the recirculation zone and the inlet swirl number for which the recirculation completely disappears is also estimated. In addition to this, an equation is curve-fit to the experimental data which correlates the length of the recirculation zone for any given cone angle and inlet swirl numbeen_US
dc.description.sponsorshipNITWen_US
dc.language.isoenen_US
dc.publisherTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERS 83-GT-93en_US
dc.subjectRECIRCULATION ZONEen_US
dc.subjectSWIRLING FLOWSen_US
dc.subjectCONICAL DUCTen_US
dc.titleAN INVESTIGATION OF THE ESTABLISHMENT OF A RECIRCULATION ZONE BY SWIRLING FLOWS WITHIN A CONICAL DUCTen_US
dc.typeOtheren_US
Appears in Collections:Mechanical Engineering

Files in This Item:
File Description SizeFormat 
AH INVESTIGATION OF THE ESTABLISHMENT OF A RECIRCULATION ZONE BY SWIRLING FLOWS WITHIN A CONICAL DUCT.pdf1.34 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.